News!

 

Jet-RPM Road Dryers

TORNADO700

TORNADO700

Is JET-RPM SWEDEN’s most powerful machine that delivers up to incredible 1200Kw and has a huge air flow of 1.5 m³/s with a temperature of 350-650 °C. The machine can be fitted with a bracket that can be mounted on both left and right side on most trucks, but of course you can get the TORNADO700 with a custom bracket for your specific needs and vehicle.

TORNADO700’s area of application is wide, but it is developed primarily for heating, drying and cleaning asphalt, when painting roads! Thanks to the powerful engine, road painting can be done at over 6km/h with a perfect result, this allows the customer to carry out a large number of kms during one day and at the same time reducethe time for road disruption.

Handling of the TORNADO700 is very easy. It has a simple control unit that has different modes for different temperatures and jobs, and so on. Start and run are managed by a smart ECU that takes care of everything from start to cooling after work is completed.

TORNADO700 is manufactured in Sweden and is a result of 25 years of technological development in the aviation industry. Where JET-RPM has taken the best features to create a smooth and robust industrial engine of highest quality.The engine can handle tough times and fits as a source of power in an efficient road dryer where it does an incredibly good job! And this with a favorable price to our customers. Pat pending and pattern protected.

Specifications TORNADO700

Engine type Industrial Turbojet Engine
Outer diameter Tube 280mm
Full length 2800-3500mm
Net weight 45kg
Heating power 290-1200Kw
Air speed Up to 1600km/h
Mass flow Up to 1,5 m3/s
Air Temp outlet 350–650 °C
Fuel consumption 30-120L/h
Acceptable fuel types Kerosene, Diesel**
Oil 2-stroke oil synthetic TCV3**4%
Start time 30-40s
Start system Industrial ECU Start system
Battery 12-24V
Fuel tank 300-400L
Weight  empty Complete 100kg
Service interval 100-150h Depending on the power output.

TROMB500MH

TROMB500MH

Is a smoothly hand operated powerful machine that delivers up to 900Kw and has a huge air supply of 0.9 m³/s with a temperature of 350-650 °C.

TROMB500MH’s area of use is wide, but it is developed and manufactured primarily for heating, drying and cleaning asphalt when lining and repairing potholes on smaller roads and parking. Thanks to the powerful motor, the work can be done even below 0 °C and this obviously makes the season longer.

Handling of the TROMB500MH is very easy. It has a simple control unit that has different modes for different temperatures and jobs, and so on. Start and run are managed by a smart ECU that takes care of everything from start to cooling after work is completed.

TROMB500MH is manufactured in Sweden and is a result of 25 years of technological developmentin the aviation industry. Where JET-RPM has taken the best features to create a smooth and robust industrial engine of high quality.The engine can handle tough times and fits as a source of power in an efficient road dryer where it does an incredibly good job! And this with a favorable price to our customers.

Specifications TROMB500MH

Engine type Industrial Turbojet Engine
Outer diameter Tube 250mm
Full length 1200mm
Net weight 70kg
Heating power 470-900Kw
Airspeed Up to 1600km/h
Mass flow Up to 0,9 m3/s
Air Temp outlet 350–650 °C
Fuel consumption 48-90L/h
Acceptable fuel types Kerosene, Diesel**
Oil 2-stroke oil synthetic TCV3**4%
Start time 30-50sec
Start system Automatic ECU Start system
Battery 12V
Fuel tank 50-90L
Weight  empty Complete 70kg
Service interval 100-150h Depending on the power output.

STORM250MH

STORM250MH

Is a small lightweight and smooth hand operated but powerful machine that delivers up to 440Kw and has an air flow of 0.5 m³/s with a temperature of 350-650 °C.

The area of application is wide, but it is developed and manufactured primarily for heating, drying and cleaning asphalt when lining and repairing pot holes on smaller roads and parking and where it is difficult to access! With its narrow little heating hood, you enter narrow and difficult to reach places.

Handling of the STORM250MH is very easy. It has a simple control unit that has different modes for temperatures and different jobs, and so on. Start and run are managed by a smart ECU who takes care of everything from start to cooling after work is completed.

STORM250MH is manufactured in Sweden and is a result of 25 years of technological development in the aviation industry. Where JET-RPM has taken the best features to create a smooth and robust industrial engine of high quality. The engine can handle tough times and fits as a source of power in an efficient road dryer where it does an incredibly good job! And this with a favorable price to our customers.

Specifications STORM250MH
Engine type Industrial Turbojet Engine
Outer diameter Tube 180mm
Full length 1000mm
Net weight 9kg
Heating power 170-440Kw
Airspeed Up to 1600km/h
Mass flow Up to 0,50 m3/s
Air Temp outlet 350–650 °C
Fuel consumption 30-45L/h
Acceptable fuel types Kerosene, Diesel**
Oil 2-stroke oil synthetic TCV3**4%
Start time 30-50sec
Start system Automatik ECU Start system
Battery 14,8V With built-in charger
Fuel tank 9L
Weight  empty Complete 18kg
Service interval 50-70h Depending on the power output.

STORM180MH

STORM180MH

Is a small lightweight and smooth hand operated but powerful machine that delivers up to 380Kw and has an air flow of 0.45 m³/s with a temperature of 350-650 °C.

STORM180MH is the same machine as its big sister STORM250MH but with a smaller heat source, yet very powerful nonetheless and performs their job exemplarily.  The area of application is wide, but it is developed and manufactured primarily for heating, drying and cleaning asphalt when lining and repairing potholes on smaller roads and parking and where it is difficult to access! With its narrow little heating hood, you enter narrow and difficult to reach places.

Handling of the STORM180MH is very easy. It has a simple control unit that has different modes for temperatures and different jobs, and so on. Start and run are managed by a smart ECU who takes care of everything from start to cooling after work is completed.

STORM180MH is manufactured in Sweden and is a result of 25 years of technological development in the aviation industry. Where JET-RPM has taken the best features to create a smooth and robust industrial engine of high quality. The engine can handle tough times and fits as a source of power in an efficient road dryer where it does an incredibly good job! And this with a favorable price to our customers.

Specifications STORM180MH
Engine type Industrial Turbojet Engine
Outer diameter Tube 180mm
Full length 1000mm
Net weight 8kg
Heating power 120-380Kw
Airspeed Up to 1600km/h
Mass flow Up to 0,45 m3/s
Air Temp outlet 350–650 °C
Fuel consumption 12-40L/h
Acceptable fuel types Kerosene, Diesel**
Oil 2-stroke oil synthetic TCV3**4%
Start time 30-50sec
Start system Automatic ECU Start system
Battery 14,8V With built-in charger
Fuel tank 9L
Weight  empty Complete 17kg
Service interval 50-70h Depending on the power output.

TROMB500POTT

TROMB500POTT

Equipped with the same powerful heat source as the TROMB500MH, but is designed to be mounted directly on the trunk for traction cars that cook pot holes, and as an alternative to gas-powered heat, the advantage of the TROMB500POTT is that the air velocity blows the hole at its extremely high velocity of air while it heats the hole effectively, this provides fast repair with maximum strength and high quality of work.

The area of application is wide, but it is developed and manufactured primarily for heating, drying and cleaning asphalt when lining and repairing potholes on smaller roads and parking and where it is difficult to access! With its narrow little heating hood, you enter narrow and difficult to reach places.

Handling of the TROMB500POTT is very easy. It handles just as when you normally are running with gas and accelerator but with a significantly more efficient heat source. You control the heat with a simple control unit that has different modes for temperatures and different jobs, and so on. Start and run are managed by a smart ECU who takes care of everything from start to cooling after work is completed.

STORM500POTT is manufactured in Sweden and is a result of 25 years of technological development in the aviation industry. Where JET-RPM has taken the best features to create a smooth and robust industrial engine of high quality. The engine can handle tough times and fits as a source of power in an efficient road dryer where it does an incredibly good job! And this with a favorable price to our customers.

Specifications TROMB500POTT
Engine type Industrial Turbojet Engine
Outer diameter Tube 250mm
Full length 1000mm
Net weight 10kg
Heating power 470-900Kw
Airspeed Up to 1600km/h
Mass flow Up to 0,95 m3/s
Air Temp outlet 350–650 °C
Fuel consumption 48-90L/h
Acceptable fuel types Kerosene, Diesel**
Oil 2-stroke oil synthetic TCV3**4%
Start time 30-50sec
Start system Automatic ECU Start system
Battery 12-24V
Fuel tank 100-400L
Weight  empty Complete 10kg
Service interval 100-150h Depending on the power output.